G-Autoprobe (Automobile Sensor Tester)

Rs 12000 Rs 9990

GAUTOPROBE is all in one sensor tester with a huge coverage of Automobile sensors and Actuators.

It is simple to use with LEDS

It has a robust and ergonomic design

Extensive Coverage of Automobile Sensor & Actuators

Frequency Voltage and Duty Modes

Handheld and portable Device

Category: Sensors Testers
Chat With Us Click To Watch

G-AutoProbe is a handheld tool for diagnosing problems in Automobile electrical

systems and sensors likeStarting and charging System

  •  Starter Motor Test
  •  Battery Load
  •  Alternator
  •  Capacitor
  •  Test Charging Signal

Electric Relay and Actuator

  •  Window Motor Windshield
  •  Wiper Motor
  •  Door Lock Actuator
  •  Trunk Look
  •  Fuel Pump Motor
  •  Stepping Motor
  •  ISA Idle Speed Actuator
  •  TR Power Transistors
  •  Fuel Injector

All Major Sensors Power & Ground of Sensors

  • MAP Sensor
  • O2 Sensor
  • RPM Sensor
  • Air Flow Sensor
  • Crank Angle Sensor
  • Vehicle Speed Sensor
  • 1 TDC Sensor
  • Water Temperature
  • Switch Pulse Generator (A/T)
  • Idle Switch
  • ABS-Wheel Speed Sensor
  • Throttle Position Sensor
  • Cam Position Sensor
  • Noise Filter
  • Main Control Relay
  • Air Temperature Sensor
  • Barometer Pressure Sensor
  • Solenoid Valve (A/T)
  • Electronic Horn
  • Electric Fan
  • Switch
  • Tachometer

Watch the pulse with the LEDs.

All automotive signals are displayed effectively on nine LEDs.

Completely safe for even the most sensitive components.

The state-of-the-art technology used in the Gautoprobe, lets you work safely with all sensors and car ECUs.

One simple test for checking all circuits.

The powerful logic probe can check for open circuits, short circuits and other defective electrical connections.

Voltage, Frequency or duty modes.

You can alternate between voltage, frequency or duty modes at the push of a button while

the Gautoprobe is in use.

Technical Data

  • Product Name: Multi Logic Probe “Gautoprobe”
  • Model No.: T-7205J
  • Controller Type: Digital/ LED Micom
  • CPU: 8Bit Micom, 10 Bit A/D Converter; 10~20 MHz Clock Speed
  • Display: 3 Digit FND; 9 Color LED
  • Display Voltage Range: DC -45 Vd.c. ~ +50 Vd.c.
  • Frequency : 0~20 KHz
  • Maximum Voltage : ± 50 Vd.c.,30 Va.c.
  • Maximum Transient Overvoltage : 500 Vpeak
  • Electrical Properties: Standby Current: 49±5 uA
  • Normal Current: 65mA±5 mA
  • Voltage Test Current: 180mA±10 mA
  • Frequency Test Current: 170mA±10 mA
  • Illumination Current: 50mA±5 mA
  • Impedance : 220k?±10 k?
  • Minimum Source Current : 220uA
  • Effective Temperature Range: 0?~ 50?
  • Power Requirements: DC 3V, LR03 (AAA 1.5V Alkaline) 2EA
  • Illumination: White LED
  • Size: 201×34×25 mm (Including Probe Pin)
  • Weight: 70 g
  • Included Accessories: Ground Clip; Extension Probe